| Category | Q&A |
 Hardware Q&A
|
10 |
First, please open your IE browser and key in the factory default IP address of http://192.168.22.1 in the URL bar.
After that, please key in the default user name of voip, default password of 1234, then you will be taken to the Web UI when you have successfully logged in as the administrator.
After that, please key in the default user name of voip, default password of 1234, then you will be taken to the Web UI when you have successfully logged in as the administrator.
No, there is no any limitation on it, just connect the standard analog telephones (pots phone) to FXS interfaces of GWs.
ALLWIN's VoIP GW supports H.323&SIP simultaneously.
ALLWIN's VoIP GW supports the following CODEC simultaneously.
-G.711 A-law / u-law (64kbps)
-G.723.1 (5.3 or 6.3kbps)
-G.726 (ADPCM 40, 32, 24, 16 kbps)
-G.729a/G.729b (8kbps)
-G.711 A-law / u-law (64kbps)
-G.723.1 (5.3 or 6.3kbps)
-G.726 (ADPCM 40, 32, 24, 16 kbps)
-G.729a/G.729b (8kbps)
If the device's indicator of "Ready" is green always, that is the device connected to GK/SIP Server normally; if the indicator of "Ready" is flash or off, that is the device connected to GK/SIP Proxy Server abnormally.
LAN 1 is connected to the computer, LAN 2 is connected to Internet real IP.
Please cancel the check box of "Prompt voice for replace dial tone" of VoIP Setup / Advance Setup / Prompt Voice of Web UI.
1. Please make sure if the power of GW is on.
2. Please check if the indicator of front panel is on when pick up the phone.
3. Please also check if the check box is cancelled on the "Prompt voice for replace dial tone" of Voip Setup / Advance Setup / Prompt Voice of Web UI.
4. Please return the device to Allwin for inspection if the above step 1 to step 3 are all correct.
2. Please check if the indicator of front panel is on when pick up the phone.
3. Please also check if the check box is cancelled on the "Prompt voice for replace dial tone" of Voip Setup / Advance Setup / Prompt Voice of Web UI.
4. Please return the device to Allwin for inspection if the above step 1 to step 3 are all correct.
FXS:
An FXS interface provides -48 VDC power and generates ring signals, connects to standard analog telephones or PBX central office line normally.
FXO:
An FXO interface receives -48 VDC power and receives ring signals, connects to PSTN line or PBX extension normally.
FXS interface can not be connected to another FXS interface, and must not be connected to PSTN line or PBX extension,
Otherwise it will cause devices damaged; FXS just can be connected to digital PBX central office line.
An FXS interface provides -48 VDC power and generates ring signals, connects to standard analog telephones or PBX central office line normally.
FXO:
An FXO interface receives -48 VDC power and receives ring signals, connects to PSTN line or PBX extension normally.
FXS interface can not be connected to another FXS interface, and must not be connected to PSTN line or PBX extension,
Otherwise it will cause devices damaged; FXS just can be connected to digital PBX central office line.
The G3000C VoIP Router includes FXS and PSTN interface; the Pin 2 and Pin 3 of telephone interface connected to PSTN line, and the Pin 1 and Pin 4 connected to pots phone or PBX CO line.
